Skip to main content

Table 1 GC and GC/MS chart of 15 major and semi-major identified components of the patchouli oil used in the present experiment

From: Does patchouli oil change blood platelet monoamine oxidase-A activity of adult mammals?

Serial no.

RT

Composition (% on FID)

Component

CAS number

1

13.413

0.032

Alpha Pinene (monoterpene)

000080-56-8

2

15.401

0.087

Beta Pinene (monoterpene)

000127-91-3

3

37.419

0.101

Elemene Delta (sesquiterpene)

020307-84-0

4

41.124

3.17

Beta Patchoulene and Beta Elemene (sesquiterpenes)

000514-51-2, 000515-13-9

5

43.503

3.619

Trans Beta Caryophyllene (sesquiterpene)

000087-44-5

6

44.508

12.031

Alpha Guaiene (sesquiterpene)

003691-12-1

7

45.921

8.628

Gamma Patchoulene and Alpha Humulene (sesquiterpenes)

000505-55-4, 006753-98-6

8

46.620

5.207

Alpha Patchoulene (sesquiterpene)

000560-32-7

9

46.759

1.786

Alloaromadendrene (sesquiterpenoid)

025246-27-9

10

47.057

1.494

Patchoulene Gamma (sesquiterpene)

000508-55-4

11

48.415

2.215

Aciphyllene (sesquiterpene)

087745-31-1

12

49.087

15.806

Alpha Bulnesene (sesquiterpenoid)

003691-11-0

13

54.008

0.883

Norpatchoulenol (terpenoid)

041429-52-1

14

54.333

1.383

Caryophylene oxide (sesquiterpene)

001139-30-6

15

60.666

32.693

Patchouli alcohol (sesquiterpene alcohol)

005986-55-0

  1. The identified above-mentioned 15 major and semi-major peaks out of 78 peaks of GC of patchouli oil were identified by GC/MS analysis. These identified 15 components, representing 89.135% of the oil and among them the patchouli alcohol, are the primary candidate molecules containing 32.693% of the oil. During the analysis, the following specification were followed: column: DB5-MS (60 m × 0.25 mm × 0.25 µm); oven: initial temperature 70 °C for 0 min and 2 °C/min to 270 °C for 20 min; inlet: injection volume 0.2 µl, temperature 270 °C, split ratio 50:1, constant pressure mode 20 psi, flow 0.89404 ml/min; detector FID: temperature 270 °C; MS acquisition parameters: acquisition mode scan, low mass 50.0, high mass 550.0, MS source 230 °C, MS quad 150 °C. Other details are mentioned in the “Materials and methods” section
  2. RT retention time, CAS chemical abstract service